Linear Drainage offers stainless steel channels and a wide choice of grating designs. Channels are available in a range of profiles, shown and described below, generally with in-built fall towards the outlets. Side bars and folds are made so that the selected grating fits flush with the show edges.
Load class is when installed with grating of same or higher class in accordance with Wade installation guidelines.
Narrow show edge (3mm wide). Suitable for most standard applications, provides a floor finish abutment face; can be produced as a curved channel with any perforated gratings.
Load Class – B125
Narrow show edge (3mm wide). Not suitable for hygiene environments. Load class D400 is also available, with 5mm wide show edge – add suffix D400 to Spec.
Load Class – C250
Not suitable for hygiene environments. Load class A15 in timber deck. Narrow show edge (3mm wide) provides a floor finish abutment face. Extended flange enables dressing a membrane and/or fixing to a timber deck (Fixing holes are available on request).
When specifying/ordering please advise the required flange depth.
Load Class – C250
Suitable for most standard applications, with 10mm wide show flange.
Load Class – C250
Load class D400 also available (2mm channel thickness) – add suffix D400 to Spec.
Additional fold provides extra stability to channel edge and a floor finish abutment face, with 25mm wide show flange.
Load Class – C250
Load class D400 also available (2mm channel thickness) add suffix D400 to Spec. Code.
A support bar is recommended in C250 and D400 applications.
For use with vinyl and other flexible sheet material Stainless steel clamp ensures watertight connection, access to channel and outlet is easily achieved without disturbing the floor covering. Minimum grating width required = 80mm. For use with vinyl and other flexible sheet material. Has an extended flange with fixing holes, for use in timber deck.
Stainless steel clamp ensures watertight connection, access to channel and outlet is easily achieved without disturbing the floor covering, with 15mm wide show flange. Minimum grating width required = 80mm.
Load Class – A15
Has an extended flange with fixing holes, for use in timber deck, with 15mm wide show flange.
Load Class – A15
Profile RP is available with a factory fitted PVC angle edging strip to which sheet floor covering can be butt-welded at the time of installation; such channels are particularly suited to heavy duty applications. With 27mm wide show flange.
Note: suitable only for channels with grating of minimum 25mm depth.
Load Class – C250
Suited for draining large areas of screed, resin and other floor finishes, as well as block paving, hidden channel can be designed to accommodate a range of paving thicknesses and flow rate requirements. Available is a range of profiles, generally with in-built falls towards the outlet.
HC – Standard hidden channel with 6mm slot
HSC – With non-removable toe bar. 6mm slot width suitable for use in barefoot areas.
HCE – Designed for use against a wall
HSCE – Designed for use against a wall. With non-removable toe bar. 6mm slot width suitable for use in barefoot areas.
Supaslot channels are suited for large areas with only low volumes of waste water such as in abattoirs, butcheries, dairies, breweries etc.
Neat and unobtrusive, the channels are a popular choice between designated wet and dry zones, such as between dishwashing and cooking areas of a kitchen.
Available in three profile options, SL, SSL (with non-removable toe bar, 6mm slot width suitable for use in barefoot areas) & HL (Designed for use against a wall).
Designed to help protect a building threshold from ingress / ponding of rainwater landing on an external door, the specially formed channel is installed, generally 10mm away from the door cill, this gap being the path for rainwater to flow into the hidden channel below.
The channel also has facility to receive run-off from a sub-cill and / or from the damp proof course / membrane that must be dressed into the channel
The channel also has facility to receive run-off from a sub-cill and / or from the damp proof course / membrane that must be dressed into the channel.
Channel & Grating for firefighting lifts
Channel & Grating for fire-fighting lift – stainless steel grade 304, (min.) 1.5mm thickness channel. Designed to prevent water, such as from a sprinkler entering as lift well.
We are here to help
Send us a message and we will respond as quickly as possible, alternatively please give us a call.